| |
|
|
120 Series
|
|
200 Series
|
| |
|
|
|
| |
Print width |
|
12" (304.8mm), 2368 pixels |
|
20" (508mm), 4096 pixels |
| |
|
|
|
| |
Print resolution |
|
200 dpi |
|
200 dpi |
| |
|
|
|
| |
Line spacing |
|
Up to 200 lines/inch |
|
Up to 200 lines/inch |
| |
|
|
|
| |
Greyscales |
|
16 to 256 |
|
16 to 256 |
| |
|
|
|
| |
Print speed |
|
Up to 64 lines/second |
|
Up to 64 lines/second |
| |
|
|
|
| |
INPUTS AND INTERFACES
|
| |
Analogue |
|
Three independent analogue channels on BNC connectors with
separate trigger input and outputs.
Sensitivity: 10mV to 10V
Polarity +, - or bipolar
input protection 100V
Trigger i/p 0.5V to 10V
|
|
Three independent analogue channels on BNC connectors
with separate trigger input and outputs
Sensitivity: 10mV to 10V
Polarity +, - or bipolar
input protection 100V
Trigger i/p 0.5V to 10V |
| |
|
|
|
| |
Digital |
|
Centronics (parallel) & serial as standard |
|
Centronics & serial (model 138)
GPIB/IEEE-488 (model 137) |
| |
|
|
|
| |
Annotation |
|
Text annotation over analogue data via RS232
interface |
|
|
| |
|
|
|
|
|
| |
Keypad |
|
Full control and setup via comprehensive
keypad on front panel. Controls include:
Configure 1, 2 or 3 channel display
Channel settings: sweep time; delay time; data sensitivity;
data polarity; contrast; sweep direction; trigger sensitivity;
internal/external trigger (all independent for each channel)
Event mark, reset, on-line/off-line, test pattern print, paper
advance, status print-out scale lines, paper speed.
Load and save settings (all settings saved to non-volatile
memory) |
| |
|
|
|
| |
Display |
|
In-built LCD display for status,
settings and error messages |
| |
|
|
|
| |
Indicators |
|
LEDs for power, stand-by and fault |
| |
|
|
|
| |
Remote control |
|
Extensive remote control capability
using commands over digital interfaces |
| |
|
|
|
| |
Thermal paper |
|
315mm (12.4") wide x 100m long
Up to 19dB dynamic range (typical)
|
|
525mm wide (20.67") x 100m long
Up to 19dB dynamic range (typical) |
| |
|
|
|
| |
Thermal film |
|
315mm (12.4") wide x 75m long
Up to 23dB dynamic range (typical)
|
|
525mm wide (20.67") x 75m long
Up to 23dB dynamic range (typical)
|
| |
|
|
|
|
|
| |
ENVIRONMENTAL
|
| |
Operating temperature |
|
0°C to +50°C
|
|
0°C to +50°C |
| |
|
|
|
| |
Storage temperature |
|
-20°C to +60°C |
|
-20°C to +60°C |
| |
|
|
|
| |
Shock and vibration |
|
|
|
MIL STD 810D |
| |
|
|
|
| |
EMC |
|
In accordance with CE |
|
MIL STD 461B, part 5, Class A4 |
| |
|
|
|
| |
MTBF |
|
|
|
15,000 hours, Ground Benign |
| |
|
|
|
|
|
| |
Dimensions |
|
443mm x 430mm x 180mm
(h x w x d)
17.45" x 17" x 7.1" stood vertical
19" rack mount compatible
|
|
225mm x 660mm x 520mm
(h x w x d)
8.855" x 26" x 20.5" laid flat
|
| |
|
|
|
| |
Weight |
|
23kg (51lbs) |
|
23kg (51lbs) |
| |
|
|
|
| |
Power |
|
90 to 264 Vac, 47 to 63Hz auto-ranging |
|
90 to 264 Vac, 47 to 63Hz auto-ranging |
| |
|
|
|
| |
|
|
|
|
|
Repairs
We operate a dedicated repair service from our UK base in Weymouth,
Dorset. Click here
for details.
Recommendations for
cleaning the print head
The use of surgical alcohol wipes (available from CodaOctopus)
with a soft implement such as a small wooden spatula, is the best
way to remove residue. Sharp metal tools, such as screwdrivers
or knives must not be used as these can easily damage the print
head beyond repair.
For advice on print head cleaning or other technical issues, please
contact our technical support team. Click
here to send e-mail.
|
